Mi180可測量6個參數：pH, ORP, EC, TDS，NaCl百分比，多種溫度量程測試
PH可在7個記憶點人選三個自動校準，甚至在測試兩種量程差別很大的試樣時也能提供精準的校準曲線。在EC 和 TDS測量時具有自動量程修正特點，可為測試樣品自動調節分辨率。所有測量可以設定在20度和25度，使用者可選擇自動溫度補償。在測量電導率時可以關閉自動溫度補償。屏幕上的穩定性指示器可使測量更加精確。為測

技術參數

MI180

范圍    PH

        MV

        EC

        TDS

        NACL

        溫度

-2.00 to 16.00 pH; -2.000 to 16.000 pH

±699.9 mV; ±2000 mV

0.00 to 29.99 μS/cm; 30.0 to 299.9 μS/cm; 300 to 2999 μS/cm;

3.00 to 29.99 mS/cm; 30.0 to 200.0 mS/cm; up to 500.0 mS/cm (uncompensed EC*)

0.0 to 14.99 mg/L (ppm); 15.0 to 149.9 mg/L (ppm); 150 to 1499 mg/L (ppm);

1.50 to 14.99 g/L (ppt); 15.0 to 100.0 g/L (ppt);

up to 400.0 g/L actual TDS (with 0.80 factor)

0.0 to 400.0%

-20.0 to 120.0°C / -4.0 to 248.0°F

分辨率  PH

        MV

        EC

        TDS

        NACL

        溫度

0.01 pH; 0.001 pH

0.1 mV; 1 mV

0.01 μS/cm; 0.1 μS/cm; 1 μS/cm; 0.01 mS/cm; 0.1 mS/cm;

0.01 mg/L; 0.1 mg/L; 1.0 mg/L; 0.01 g/L; 0.1 g/L

0.1%

0.1°C / 0.1°F

精度    PH

        MV

        EC

        TDS

        NACL

        溫度

±0.01 pH; ±0.002 pH

±0.2 mV; ±1 mV

±1% of reading ±(0.05 μS/cm or 1 digit)

±1% of reading ±(0.03 ppm or 1 digit)

±1% reading

±0.4°C / ±0.8°F

REL MV OFFSET

±2000 mV

校準    PH

        EC

        NACL

        溫度

1, 2 or 3 點校準, with 7 memorized buffers (pH 1.68, 4.01, 6.86, 7.01, 9.18,

10.01 and 12.45)

1 point slope calibration with 6 memorized solutions: (84 μS/cm, 1413 μS/cm,

5.00 mS/cm, 12.88 μS/cm, 80.0 μS/cm, 111.8 mS/cm)

1 point, with MA9066 solution

2 point, at 0 and 50°C / 32 and 122°F

溫度補償

自動或手動  -20.0 to 120.0°C / -4.0 to 248.0°F

溫度系數

0.00 to 6.00%/°C (EC and TDS only)進行選擇

PH及溫度電極

MA917B/1  MA831R

EC/TDS/NACL/溫度電極

MA814D/1

TDS因子

0.40 to 0.80 (default value is 0.50)

LOG ON DEMAND

up to 50 samples on each range (pH, mV, EC, TDS, NaCl)

GLP

上一個pH, EC, NaCl校準數值

PC轉換接口

RS232或USB光學轉換

環境

0 to 50°C / 32 and 122°F; max RH 95%

輸入阻抗

1012 Ohm

電源

12 VDC power adapter (included)

尺寸

230 x 160 x 95 mm

重量

0.9 kg